• Connect your monitor(s) directly to your graphics card (GPU) — not the motherboard.
• Use DisplayPort if you want maximum clarity, refresh rate, and response time.
• HDMI works too — just don't limit your potential.
• ⚠️ Always plug into the GPU ports — the motherboard ports are dormant unless you're running integrated graphics (and you're not, right?).

Plug your keyboard, mouse, and USB devices into the rear I/O panel of your motherboard.

• Going wireless? Make sure your Bluetooth dongle is seated in a USB port.
• Use high-speed USB 3.0 ports (usually blue) for devices like capture cards, storage, and streaming gear.

• Analog (3.5mm): Plug your headset/speakers into the green port on the front or back of your case.
• USB Audio Devices: Slot them into any available USB port.
• ⚠️ Some devices may need to be selected manually as your "Default Audio Device" in Windows. Check your sound settings post-boot.

• Hardline? Plug in an Ethernet cable to the rear LAN port.
• No cable? Use the Wi-Fi antennas in your VÖXBURG accessory box.
• Screw them into the gold connectors (Wi-Fi 6/7 plugs) on the rear I/O.
• Once active, you'll lock into the network and sync with your digital ecosystem.

• Grab your 3-prong power cable from the VÖXBURG crate.
• Plug into the PSU port on the back of your rig.
• Flip the power switch to | (ON).
• Locate your case's Power Button (usually front/top/side).
• Press it.
• 💥 Boot sequence initiated. POST should begin. Monitor for first signal.